Lcd Screen Glue Remover Machine- Loca UV Glue Remover Machine for iPhone Samsung LCD Touch Sc
  • Lcd Screen Glue Remover Machine

Lcd Screen Glue Remover Machine

  • Product Code: MACHINE
  • Availability: Out Of Stock

  • £149.00

Loca UV Glue Remover Machine for iPhone Samsung LCD Touch Screen
1. Professional Cleaning Machine
2. Easy installation

Loca UV Glue Remover Machine for iPhone Samsung LCD Touch Screen

 

OCA Glue Remover Machine UV Glue Remover  

 

The machine can clean erase refurbish the LOCA OCA UV glue residue

for iphone 4 4s 5 5S 5C

for Samsung galaxy s2 s3 s4 note 1 2 3 

And for any of other smart phones.

 

1. If you want to use this machine on different smartphones, like for iPhone 5 Galaxy S3 S4 and so on, you need to change molds. There are various molds available, and universal molds available,too.

 

2. Easy installation

 

3. It take about 2-3 second to clean 95% of LOCA OCA UV residue glue on the LCD surface

 

4. Protective power system

 

 

Specification of equipment

 

No.

Project

Specification

1

Product Name

Glue Remover Machine RM-345

2

Product Material

Bakelite, Aluminum, copper, iron blade

3

Product Size:

230(mm)L x 330(mm)W x 400(mm)H

4

Product N.W.:

12.5KG

5

Working voltage

AC180V-265V   50HZ/60HZ

6

Temperature-controlled Meter

REX-C100FK02-M*AN

7

Temperature range

0-400°C

8

Heat resisting Blade Size

80(mm)L x 15(mm)W x 0.35(mm)thickness

9

Accuracy of Temperature-control

±5%FS

10

Method of Temperature Control

PID technology

11

Insulation Resistance

>500MΩ(500VDC)

12

Dielectric Strength

1500VAC

13

Power

<500W

14

Working Environment

0-50°C,30-85%RH No corrosive gas environment

 

How to Use:

  1. Separate the broken glass from the LCD screen first
  2. Adjust the Equilibrium of blade and mould, push the mould back and forth,check if the blade is parallel to the mould
  3. Put the LCD Screen into the mould
  4. Push down the hand shank to check the height between black and LCD Screen

Attention:

1. When the hand shank dropped down, the lowest point of the blade won’t be bellow than the LCD level; it is perfect to make the blade touch just the LCD screen.

2. The mould must be kept balance, otherwise LCD screen maybe scratched by blade

3. Push the LCD mould from front to back